Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Modelsort icon Year Description Location
Used AGIE AGIECUT 100 CD - wire EDM machine | Asset-Trade
AGIE CHARMILLES
AGIE CHARMILLES
100 CD wire EDM machine 10/1990 AGIE AGIECUT 100 CD - wire EDM machine Travel X300 Y200 Z256 mm Wire diameter from 0.03 to 0.3 mm Workpiece Length x width 810 x 580 mm height 250 mm max. WS-Weight 200 kg Auto. Wire threading Full bath machine... Germany NRW
Used WEINGARTEN 12000 kn Hydraulic press | Asset-Trade
WEINGARTEN
WEINGARTEN
12000 kn Hydraulic press 1991 overhauled 2011 WEINGARTEN 1200t hydraulic transfere press Build 1991 with 2011 DIEFFENBACHER feeder Stroke rate 10-30 strokes / min Table and ram plates dimensions 3600x 1500 mm ² Mould height 1200 mm Slide stroke 500mm CNC... Germany
Used ESTRATEGA slitter line 1500 x 3 mm Longitudinal  | Asset-Trade
EXTRATEGA
EXTRATEGA
1500x3 mm Slitting line 2008 Used ESTRATEGA slitter line 1500 x 3 mm Longitudinal Decoiler loading bench introduction unit group centering devices rotary cutters up and down saddles scrapwinder press felt press coiler carousel with two arms... Italy
Asset-Trade http://www.asset-trade.de/
UMA
UMA
17 SE 1969 UMA 17 SE - High Speed Lathe Swing Diameter over bed 370 mm over slide 210 mm s Turning length / head length 750 mm Spindle bore dia. 42 mm Multifix quick change tool holder Feed along 0.05 -0.3 mm / rev reach 0.04... Germany
Used EHT 250t 4m with new control machine | Asset-Trade
EHT
EHT
250t 4m with new control 1981 overhauled 2003 Used EHT Pressbrake 250 with new cnc control New Cybelec DNC 80 Control in 2003 Bending force 250 tons Bending length 4.000mm Sold without tooling.   As one of the oldest enterprises in Germany, EHT with its head... Germany
MATEC
MATEC
30 SD twin spindle milling center 2004 MATEC 30 SD twin spindle milling center Drives "ON" 15.674h / spindle duration 4.197h tilting table double spindle Accuracy: 0.01 mm X-axis: 450 mm Y-axis: 400 mm Z-axis: 450 mm Clamping length: 800 mm Width... Germany