Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
SW BA400-2 CNC HMC for Sale 1 | Asset-Trade
SW / EMAG
SW / EMAG
BA 400-2 Twin Spindle HMC 1998 USED Schwäbische Werkzeugmaschinen SW BA 400-2 horizontal twin-spindle machining centre CNC Control SIEMENS 840C TECHNICAL DETAILS : Travel X, Y, Z : 400/450(700)/400 mm Rapid feeds : 50 m/min 2 spindles... Germany
Used WALDRICH COBURG 5m Planer for Sale | Asset-Trade
WALDRICH COBURG
WALDRICH COBURG
5000x800 mm Hydraulic Single Column 1962 Used WALDRICH COBURG 5m Hydraulic Single Column Planing Machine Table length 5000 mm x width 750 mm Working height 500 mm Total power 18kw Machine can be operated under current. Open-side planing machines are open on... Germany
Used DMG Gildemeister GMX 250s linear for Sale | Asset-Trade
GILDEMEISTER
GILDEMEISTER
GMX 250S Linear CNC Mill/Turn Centre 2006 Used DMG Gildemeister GMX 250s linear - CNC Turning / Milling Center CNC control Heidenhain Plus iT Self-centering diameter 315 of the main head Pb Mm. 90 Full tailstock chuck Ø. 315 B-axis inclination with... Turkey
Used TOS - SKQ 16 NC With New Siemens Control | Asset-Trade
TOS
TOS
SKQ 16 NC new Siemens Control 1984 TOS Hulin SKQ 16 rotating carousel center with new Siemens control New Siemens 840 D control in 1999 Swing diameter 1900 mm Turning Diameter 1440 mm Turning length 1200mm Drive power 63 KW Speed ​​from 3.1 to 315 U /... Germany
Used CTR NORTE VS 800 Vertical CNC Boring & Milling Machine | Asset-Trade
CTR-NORTE
CTR-NORTE
VS 800 Vertical CNC Boring and Milling Machine 1991 Used NORTE VS 800 - Vertical CNC Boring and Milling Machine Hours in operation: 34 415H Siemens Sinumerik 820M Travel: x 2000 y 400 z 400 mm 2 rooms, each work in the X 800mm (2000mm without intermediate wall) A work... Germany
NAXOS-UNION
NAXOS-UNION
RMBO 1100 Crank Pin Grinding Machine 1982 NAXOS UNION RMBO 1100 - crankshaft center trunnion grinding Automatic crankshaft Grinding of the main bearing for 5 - and 6-cylinder crankshaft control Marposs Centre height 225 mm Center distance 1250 m... Germany