Asset-Trade

Assessment and Sale of Used Assets world wide

SPINNER - MVC1100-A V3.1 4 Axis VMC

Printer-friendly version
Ref. Nr.: 
636-09031409
 
Year: 
05/2011
 
Location: 
Germany
 
Model: 
MVC1100-A V3.1
 
Available: 
Immediately

Used SPINNER MVC1100-A V3.1 - Vertical 4-axis CNC machining centre

Spindle hours 3960, ON 11,254 hrs.

  • CNC Fanuc OID Control with workshop programming Manual Guide
  • Traversing range X = 1100mm, Y = 610mm, Z = 610mm
  • Rapid traverse in X / Y / Z: 18/18/15 m / min
  • Table size 1200x600 mm
  • Main spindle speed max 8000 rev / min, SK 40, 15.0 kW
  • 26 bar coolant through the spindle with paper band filter on auxiliary tank
  • chip conveyor
  • 32x double arm tool changer
  • Dimensions (LxWxH): 4,138 x 2,872 x 2,505 mm
  • preparation for
    • Round table as 4th axis (possibly incl. Round table)
    • Workpiece probe Blum TC50

The machine is in a very good condition and can under power by appointment.

Purchase information for :
Used SPINNER - MVC1100-A V3.1 4 Axis VMC

Buyers Premium: +15%
VAT: 19%
Sold as: Free Loaded on Truck (LOT)
 

Images of Used Machinery:

Used SPINNER MVC1100-A V3.1 - 4-axis VMC | Asset-Trade
Used SPINNER MVC1100-A V3.1 - 4-axis VMC | Asset-Trade
Used SPINNER MVC1100-A V3.1 - 4-axis VMC | Asset-Trade
Used SPINNER MVC1100-A V3.1 - 4-axis VMC | Asset-Trade
Used SPINNER MVC1100-A V3.1 - 4-axis VMC | Asset-Trade
 

Direct Contact for :
Used SPINNER - MVC1100-A V3.1 4 Axis VMC

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
MATEC
MATEC
30 SD twin spindle milling center 2004 MATEC 30 SD twin spindle milling center Drives "ON" 15.674h / spindle duration 4.197h tilting table double spindle Accuracy: 0.01 mm X-axis: 450 mm Y-axis: 400 mm Z-axis: 450 mm Clamping length: 800 mm Width... Germany
KITAMURA
KITAMURA
Mycenter 2Xif SP Like New 2011 KITAMURA MyCenter-2Xif SP - vertical machining center   100 spindle hours 200 ON hours Fanuc control 16iMB Rapid traverse X Y Z: 50/50/36m/min Table: 14 "x 22" (355 x 560mm) Axes (X, Y, Z): 20 "x 14... Germany
Used DMG DECKEL DMC 63 V CNC milling machine for Sale
DECKEL
DECKEL
DMC 63V new Spindel 2000 Used DMG DMC 63 V CNC milling machine The spindle was remanufactured recently – it has new bearings, springs, seal and piston. Controller Heideneien 426M Travels  X Axis – 630 mm Y Axis Travel... Germany
Used AXA VSC-1-500-M/C CNC milling machine | Asset-Trade
AXA
AXA
VSC-1-500-M/C CNC milling machine 2004 Used AXA VSC-1-500-M/C CNC milling machine Control unit Grundig CNC Pilot Table 1000x500 mm X,Y,Z Travel 500x420x600 mm Spindle taper Sk40 Spindle speed 8000 rpm Magazine 40 tools Can be seen under Power Turkey
Used HAAS TM1- P VMC for Sale 1| Asset-Trade
HAAS
HAAS
TM 1 P CNC VMC 2010 Used HAAS TM 1 P CNC vertical machining center Total Power: about 11,000 hours. Tool change about 94 000 HAAS Control Technical specifications: Travel X 762 mm Y 305 mm Z 406 mm. Machine table L 1213 mm B 267 mm. Max.... Germany
Used CTR NORTE VS 800 Vertical CNC Boring & Milling Machine | Asset-Trade
CTR-NORTE
CTR-NORTE
VS 800 Vertical CNC Boring and Milling Machine 1991 Used NORTE VS 800 - Vertical CNC Boring and Milling Machine Hours in operation: 34 415H Siemens Sinumerik 820M Travel: x 2000 y 400 z 400 mm 2 rooms, each work in the X 800mm (2000mm without intermediate wall) A work... Germany