|
|
DECKEL
 |
CTX alpha 300 V3 with Shop Turn |
2010 |
Used DMG MORI CTX alpha 300 V3 CNC lathe
Machine hours only 11,173 hours
Spindle hours: only 3,257 hours
CNC control: Siemens 840D with shop turn
2020 new revolver
Technical specifications:
Travels:
X axis: 110mm
Z... |
Germany |
|
|
DECKEL
|
DMC-80 U 5 axis |
09/2001 |
Used DECKEL MAHO DMC 80 U hi.dyn 5-Axis machine center
Heidenhein CNC Controls
Operating Hours On 52199 / Spindle 18451 hrs.
Last repairs
August 2019 the tool chain was overhauled
December 2013 spindle submerged... |
Germany |
|
|
HOSOKAWA BEPEX
 |
GB.1290 Chocolate Candy Production line |
2003 |
Used Bühler HOSOKAWA BEPEX - GB.1290 Chocolate Candy Production line.
Description:
Casting machine according to the "endless chain" principle. Single belt installation with continuous transport chain. The... |
Spain |
|
|
WEILER
 |
UD24 CNC Lathe |
1987 |
Used WEILER UD 24 CNC lathe
Control: Siemens
Technical specifications:
Travel paths: X = 190mm, Z = 225mm
Turning diameter: 190mm
Turning length: 180mm
... |
Germany |
|
|
ZEISS
 |
MC 850 Measung Machine 3D |
2005 |
Used CARL ZEISS MC 850 Coordinate Measuring machine in moving portal construction
Table top in granite
measuring range
X = 850 mm
Y = 1200 mm
Z = 600 mm
measurement uncertainty
U1 (1): 2.5 + L / 250
U3 (1): 2.8... |
Germany |
|
|
DECKEL
|
DMU 85 monoBLOCK low hours |
2011 |
Used DMG DECKEL MAHO DMU 85 monoBLOCK (3-axis) - UNIVERSAL MILLING MACHINE
Operating hours approx. 19,500 h
Spindle hours approx.7,800 h
HEIDENHAIN iTNC 530 HSCI
Technical data:
Travels 935 mm x 850 mm x 650 mm
Motor... |
Germany |
|
|
ROLLOMATIC
 |
CNC 600 X CNC Tool Grinding Machine |
1999 |
Used ROLLOMATIC CNC 600X - 6 Axis - CNC Tool Grinder
CONTROL GE FANUC 16M
ROBOT LOAD & UNLOAD ( extra 2 Axis)
Diameter range 0.2 - 12.7mm
Technical Data
Travels
X axis : 228.600 mm
Y... |
Germany |
|
|
HEDELIUS
 |
RotaSwing 100 K Celox 5 Axis |
2005 |
Used HEDELIUS RotaSwing 100 K Celox - traveling column machining center
5-axis simultaneous machining Machining center with integrated swivel-swivel table unit and permanently installed machine table
2x work rooms -... |
Germany |
|
|
TAKISAWA
 |
TY-2000 YS Turning-Milling centre |
2011 |
Used Takisawa TY-2000 YS Turning Milling center with loading portal
Operating hours AN 9867 / spindle 3088
CNC control Fanuc 31i-A with Tiwap
Technical specifications:
Turning diameter 65 mm
Turning length 250 mm
Cone... |
Germany |
|
|
SAFAN
 |
VSK 80 - 3100 Press break |
1979 |
Used Safan VSK 80-3100 - Press Brake
Technical Data:
Working width: 3100mm
max. pressing force: 800kN
connected load: 5.5kW.
|
Germany |
|
|
MIKRON
 |
VCE 600 Pro with Heidenhain TNC 530 |
2006 |
Used MIKRON VCE 600 Pro - vertical machining center
Control type CNC control Heidenhain iTNC 530
Approximately 50,000 operating hours
Technical details
Travels
x-way 600 mm
y-way 500 mm
z-way 540 mm
Max. Distance... |
Germany |
|
|
PRESSTEK
 |
34DI-E offset printing machine |
2009 |
Used PRESSTEK 34DI-E offset printing machine
First installation in 2011 / year of construction 2009
Technical specifications:
Printing capacity approx.3,500,000 prints
Equipment details
4 printing units
Momentum RIP... |
Germany |
|
|
HEBROCK
 |
AKV 3003 DK-F Edge banding machine with joining unit |
2011 |
Used HEBROCK AKV 3003 DK-F edge banding machine with joining unit.
The glue tank was cleaned and all relevant parts replaced.
All milling cutters are new (DIA joining cutters sharpened), as well as a complete set of... |
Germany |
|
|
SPINNER
 |
U5-1520 Like new |
11/2018 |
Used SPINNER U5-1520 - 5 axes with rotating / tilting table
Only approx. 2,493 switch-on hours & approx. 880 spindle hours
Last overhaul by Spinner in early February 2020.
CNC control Siemens 840DE... |
Germany |
|
|
WAFIOS
 |
FUL 31 Sping Coiling Machine |
1987 |
Used WAFIOS FUL 31 - spring coiling machine
Technical Data :
Wire thickness:
One-finger system 0.4-1.8 mm
Two-finger system 0.4-2.5 mm
Feather length: practically unlimited
Spring outer Diameter:... |
Germany |
|
|
GILDEMEISTER
|
MD7iT 4 Axis |
2001 |
Used GILDEMEISTER Max Müller MD7iT 4 axes
Control: CNC control Eltropolit
The machine was geometrically overhauled in 2013 and is also equipped with an Elbaron oil mist separator.
Technical Data
Total... |
Germany |
|
|
TRAUB
 |
TNC 65 DG with Bar Loader |
2004 |
Used TRAUB TNC 65 DG with bar loading magazine STAMAG DN 61
Hours of operation: approx. 30000h acc. Control.
Switch-on hours via main switch 45,000 hours.
The machine has 2 turrets, no counter spindle and automatic... |
Germany |
English
Deutsch