Asset-Trade

Assessment and Sale of Used Assets world wide

DECKEL - DMU 80T Spindle bearings renewed in December 2016

Printer-friendly version
Ref. Nr.: 
813-03281000
 
Year: 
2002
 
Location: 
Germany
 
Condition: 
Model: 
DMU 80T
 
Available: 
Immediately
 
Weight (kg): 
7.000 kg

Used DMG DECKEL DMU 80T 

Control unit Heidenhain TNC 426

Spindle bearings renewed in December 2016

Good general condition

  • Travel distances
    • X-way 800 mm
    • Y-way 650 mm
    • Z-way 550 mm
  • Spindle speeds - stepless 20 - 6,300 rpm
  • Drive power 100% ED 11.00 kW
  • Drive power 40% ED 16.20 kW
  • Table surface area 1,100 x 650 mm
  • Number of T-grooves 10
  • T-slots - clearance 63 mm
  • T - notch width 14H7 mm
  • Table load 0,60 t
  • Feed rate X / Y / Z axis 20 - 10,000 mm / min
  • Rapid traverse X / Y / Z 15.00 m / min
  • Tool holder SK40 / HSK-A50
  • Tool magazine: 25
  • Tool diameter max. 80 mm
  • Tool diameter with 2 frel shots 160 mm
  • Tool length - max. 315 mm
  • Total power requirement 25,00 kW
  • Space requirement approx. 5,00 x 4,00 x H2,80 m

Purchase information for :
Used DECKEL - DMU 80T Spindle bearings renewed in December 2016

VAT: 19%
Sold as: Ex Works
 

Images of Used Machinery:

Used DMG DECKEL DMU 80T for Sale | Asset-Trade
 

Direct Contact for :
Used DECKEL - DMU 80T Spindle bearings renewed in December 2016

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
Used KITAMURA Mycenter 3XiF vertical machining center 4 axis machine | Ass
KITAMURA
KITAMURA
Mycenter 3XiF vertical machining center 4 axes 2007 KITAMURA 3X iF SP vertical machining center with pallets 2 at 180 ° turntable assembly   Scraped precision flat guides; Ideal for steel processing; Spindle and cooling bed Spindle ON  8300 HRS... Germany
Used HAAS TM1- P VMC for Sale 1| Asset-Trade
HAAS
HAAS
TM 1 P CNC VMC 2010 Used HAAS TM 1 P CNC vertical machining center Total Power: about 11,000 hours. Tool change about 94 000 HAAS Control Technical specifications: Travel X 762 mm Y 305 mm Z 406 mm. Machine table L 1213 mm B 267 mm. Max.... Germany
Used DMG DECKEL DMC 63 V CNC milling machine for Sale
DECKEL
DECKEL
DMC 63V new Spindel 2000 Used DMG DMC 63 V CNC milling machine The spindle was remanufactured recently – it has new bearings, springs, seal and piston. Controller Heideneien 426M Travels  X Axis – 630 mm Y Axis Travel... Germany
Used AXA VSC-1-500-M/C CNC milling machine | Asset-Trade
AXA
AXA
VSC-1-500-M/C CNC milling machine 2004 Used AXA VSC-1-500-M/C CNC milling machine Control unit Grundig CNC Pilot Table 1000x500 mm X,Y,Z Travel 500x420x600 mm Spindle taper Sk40 Spindle speed 8000 rpm Magazine 40 tools Can be seen under Power Turkey
HARDINGE
HARDINGE
Conquest VMC-700 3-Axis Machine Centre 04/1997 HARDINGE Conquest VMC 700 - CNC vertical milling machine / machining center Renewed in 2008 guideways 64,300 operating hours Fanuc 18M travels x 700 mm / 28.0 inches Y: 500 mm / 18.0 inches Z: 600 mm / 22.0... Germany
Used DMG DECKEL - MAHO DMU 80 P | Asset-Trade
DECKEL
DECKEL
MAHO DMU 80 P DMG 1999 DMG Deckel Maho DMU 80 P Universal CNC - milling & drilling machine Spindle hours approx 18300 hours power approx 45500 hrs CNC control Heidenhain 426 Specifications: X-travel 800 mm Y-travel 700 mm Z-travel... Germany