Asset-Trade

Assessment and Sale of Used Assets world wide

FRECH - DAK 200 H cold chamber die-casting machine

Printer-friendly version
Ref. Nr.: 
638-09171226
 
Year: 
27.07.1989
 
Location: 
Germany
 
Condition: 
Model: 
DAK 200 H
 
Available: 
Immediately
 
Weight (kg): 
8.000 kg

Used FRECH DAK 200 H - cold chamber die casting machine

  • Hours: ca. 50000h
  • Shot made: about 3-4 000 000 pieces

Technical specifications:

  • Control: Data Control
  • Clamping force: 2,200 kN
  • Insertion force 25 ton
  • Plunger stroke 350 mm
  • Ejector 11 to
  • Size of platens 755 * 755 mm
  • Passage between the pillars 500 * 500 mm
  • Column diameter 85 mm Min. / Max.
  • Mold height min. / Max. 250-600 mm
  • Ejector stroke 100 mm
  • Mold opening stroke 430 mm
  • Casting positions 0, 60, 120 mm
  • Casting volume 733 cm²
  • Drive power 22 KW
  • Machine dimensions L / W / H 5.8 x 2.3 x 2.6 m
  • 400V three-phase

Additional Information: machine was to the end (June 2014) in production under power and is now stored dry in our warehouse ready for pickup.

 

Scope of supply:

  • Machine + cabinet + control panel rear cylinder (was dismantled due to transport height)
  • NO FURNACE available!!!

 


Flexible and Powerful: Cold-Chamber Die Casting Machines

Frech provides cold-chamber die casting machines with locking forces from 2,750 kN to 44,000 kN for the production of a wide range of castings, from small OEM parts to engine blocks or gearbox housings, as well as chassis and body components made of aluminium and magnesium alloys. The patented Vacural process has placed Frech at the top of the world of light-weight processing engineering. Together these cold-chamber die casting machines make up the K family.


Advantage Of Purchasing A Used FRECH - DAK 200 H - Cold Chamber Die Casting Machine

Die Casting has been one of the vital mechanical production processes for any industry in general. Be it automobile, or aviation, or manufacturing and production, every industry needs some machine tools and parts that can only be manufactured economically with die casting process. In everyday life we come across several components that have been manufactured with die casting method. Die casting is often characterized by fine surface finish depending upon the casting standards and dimensional consistency. 

Die casting process:
The casting process in a die casting machine can be primarily divided into two types; i.e. cold chamber process and hot chamber process. In cold chamber die casting machines, the molten metal is poured externally into the die casting machine offering it’s a lower operating temperature and better production ability. In contrary, in hot chamber process, the molten metal always remains in contact with some part of the machine offering higher operational temperature. In most of the modern die casting machines, the process is CNC controlled to automate the production process with less human intervention.

FRECH - DAK 200 H - Cold Chamber Die Casting:

Out of the manufacturers of cold chamber die casting machines, FRECH is considered as a leader in the world. This manufacturer is well-known for its ability to provide customized solutions as per individual demands. The FRECH – DAK 200 H Cold Chamber Die Casting Machine is one of the best machines from the manufacturer, which is particularly suitable for small and precision dies manufactured under high production efficiency. Each machine from FRECH can be tailored to match the customers’ specific requirements as per pre-order.
FRECH is also known as the holder of patent for Vacural Technology for cold chamber die casting. This company has brought a break-through in lightweight die casting with their patented technology and refined series of FRECH - DAK 200 H - Cold Chamber Die Casting Machine.

The technical specification of FRECH – DAK 200 H can be summarized as below:

Operational voltage: 400V (3-Phase)
Machine Control: Computerized Data Control
Clamping Force: 2200 Kilo Newton (kN)
Die Insertion Force: 25 Tonne
Minimum Mold Height: 200 millimeter
Maximum Mold Height: 600 millimeter
Casting positions: 0mm, 60mm & 120 mm
Max casting volume: 733 square centimeter
Drive power: 22 kilowatt
Machine dimension: 5.8 meter (Length) X 2.6 meter (Height) X 2.3 meter (Width) 

Why a used FRECH - DAK 200 H - Cold Chamber Die Casting Machine:

There are many advantages of using a used FRECH - DAK 200 H - Cold Chamber Die Casting for lightweight & low-melting point die casting. Here are a few prominent aspects of the FRECH – DAK 200 H, which can suit most of the die casting demands from any mechanical production industry:
The cost is much lesser as compared to purchasing a new FRECH Machine
A used machine has already run successfully with some manufacturing factories, which makes it a safe-bet for trouble-free operation
The cost of AMC (Annual Maintenance Contract) and regular maintenance is considerably lower than that of any new machine
Over-howling cost is much lower
Can operate under simple guidance and support of technical advisors
A used machine in good running condition has always attracted buyers with less budget and who couldn’t compromise efficiency with costs. A practical and thoughtful selection of any used FRECH - DAK 200 H - Cold Chamber Die Casting Machine can help the manufacturers in many ways!
 

Purchase information for :
Used FRECH - DAK 200 H cold chamber die-casting machine

VAT: 19%
Sold as: Ex Works
 
 

Images of Used Machinery:

Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
Used FRECH DAK 200 H  Cold Chamber Die-Casting machine
 

Direct Contact for :
Used FRECH - DAK 200 H cold chamber die-casting machine

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.

Similar Machines:

Images Make Model Year Description Location
Used CHIRON MILL 800 5-Axis-Machining Center 1 | Asset-Trade
CHIRON
CHIRON
MILL 800 5 Axis with Tilt Rotary Table 2007 Used CHIRON MILL 800 - 5 Axis High speed Vertical Milling Machine Operating hours : ​Total ON 24.515 / Spindle Hours 3.856 CNC Control SIEMENS Sinumerik 840D Powerline (Shopmill) Axis travel in X/Y/Z... Germany
Used HERKULES - WS300 Roll grinding machine | Asset-Trade
HERKULES
HERKULES
WS300 Roll grinding machine 1950 HERCULES WS300 - roll grinder / cylindrical grinding Grinding length: 3000 mm Diameter - 40 min max: 600mm. Grinding speed 10 -33 m / s Grinding wheel dimensions 600x50x203mm Power: 7.5 KW With lunettes ranging from 40... Germany
Second Hand CARL ZEISS Prismo 7 for Sale cheap | Asset-Trade
ZEISS
ZEISS
PRISMO 7 CMM 1994 Used CARL ZEISS Prismo 7 (ST3 ATAC) Coordinate Measuring Last Calibration 4/2017 Technical Data: Measuring Area 1200 x 900 x 700 mm Max Parts Weight 1.300 KG U1 = (2,7 + L/300) µm U3 = (3,2 + L/300) µm... Germany
[title] | Asset-Trade
MORI SEIKI
MORI SEIKI
NZ2000T3Y3 CNC multi-axis rotary milling center 2008 USED MORI SEIKI NZ2000T3Y3 CNC multi-axis rotary milling center with  IEMCA Bar loader Master 880 Verso MP Operational hours: ON 11.413 / Spindel  14.95 hrs CNC Control FANUC MSX-701 III Max. machining... Germany
MIKRON
MIKRON
WF 51 C / 150 with tooling 1985 MIKRON WF 51 C / 150 - Milling Machine - Universal X / Y / Z 800/500/460 mm Control Heidenhain TNC 150 Speed 31.5 - 3150 U / min Feed 1 - 3000 mm / min Rapid traverse 6000 mm / min Clamping area 1000... Germany
Used DORST - TPA 50/2 Compacting Powder Press | Asset-Trade
DORST
DORST
TPA 50/2 Compacting Powder Press 1988 DROST TPA 50 / 2 - Powder Compacting Press Press capacity up to max. 50 t Off force max. 30 t Counter force in pressing position to max. 25 t Return force max. 3,2 t Adjustable stroke rate of 6 - 30 min strokes.... Germany