Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
TRAUB
TRAUB
TNS30/42 with bar loader 1989 Used TRAUB TNS 30/42 - CNC turning and milling center CNC Control TX-8-D Hours: 53881 3 turrets with 12 tools red. drive subspindle conveyor chip conveyor Machine has a DN42-3000 Max Cutting Length: 220 mm Maximum... Germany
Used Mazak Quick Turn 15N for Sale very Cheap | Asset-Trade
MAZAK
MAZAK
QT 15 Very Cheap 5/1989 Used Mazak Quick Turn 15N - CNC turning center Spindle Controller is defect, but machine has low hours. Control CNC Mazatrol CAM Technical details Turning diameter 255 mm Turning length 510 mm Swing diameter over cross... Germany
Used HEDELIUS RS 605 K20 Machine Center for Sale Cheap 1 | Asset-Trade
HEDELIUS
HEDELIUS
RS 605 K20 5-axis traveling column machining center 12/2012 Used HEDELIUS RS605 K20 5-axis machining center RotaSwing 605 K20 with integrated swivel and rotary axis unit and a permanently installed machine table, CNC Heidenhain iTNC 530 Operating Hours Total 7438Hrs ON 4618... Germany
WEINGARTEN
WEINGARTEN
XTDHZ 250t with reel + straightening machine 1948 WEINGARTEN Type: XTDHZ - eccentric press 250 t Cabinet: new main motor controlled contactor control Feed: servo-driven roll feed "new" Scrap Shears: Mechanical Table size: 1300 x 850 mm Strokes... Germany
Used WAGNER - Z3050x16(I) PRC 50 - Radial Drilling Machine | Asset-Trade
WAGNER
WAGNER
Z3050x16(I) PRC 50 - Radial Drilling Machine 1991 WAGNER Z3050 x 16 (I) -  Radial Drill - PRC 50 Arm. 1600 mm Max shift. 1.300 mm Drilling cap. Ø 50 mm Tap M 60 x 4 mm Spindle. 5 mk Spindle Ø + stroke. 70 + 300 Speed. 12 x 25 min to 2000 rpm.... Germany
Used KERN DS22A high performance centre lathe for sale
KERN
KERN
DS 22 A High Performance lathe 1974 Used KERN DS 22A Centre Lathe workspace Swing diameter 520 mm Turning length 950 mm above the bed 300 mm Distance between centers 1000mm Speed 1.500 U / Min Dimensions (LxWxH) 2300x950x1300 mm ca. Germany