Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version

Similar Machines:

Images Make Model Year Description Location
Used DOOSAN Puma 3100 M CNC lathe for sale | Asset-Trade
DOOSAN
DOOSAN
Puma 3100M CNC Lathe 12/2014 Used DOOSAN Puma 3100 M CNC lathe Run time: 969 hours 45 min. Capacity: swing over bed 850 mm, swing over saddle 670 mm, recom. turning diameter 305 mm, max. turning diameter 420 mm, max. turning length 760 mm, bar... Estonia
Used MIKROMAT 60SC Coordinate Grinding Machine | Asset-Trade
MIKROMAT
MIKROMAT
60 SC Coordinate Grinding Machine 1996 Used MIKROMAT 60SC Coordinate Grinding Machine Control: Siemens Sinumerik 840C Table size: 1.110 x 800mm, max weight 1.5tons Travels X-1000 mm Y-800 mm Z-400 mm Working height 350mm MK25 4500-25000 rpm MK 60 25000-... Germany
[title] - Asset-Trade http://www.asset-trade.de/
DUNKES
DUNKES
HDZ 315/200/200 deep draw press 1991 DUNKES - HDZ 315/200/200 - Deep-pull presses Was overhault for over 37.000 Euro but never went into production again.     Germany
Used DMG DECKEL DMU 80T for Sale | Asset-Trade
DECKEL
DECKEL
DMU 80T Spindle bearings renewed in December 2016 2002 Used DMG DECKEL DMU 80T  Control unit Heidenhain TNC 426 Spindle bearings renewed in December 2016 Good general condition Travel distances X-way 800 mm Y-way 650 mm Z-way 550 mm Spindle speeds - stepless 20 - 6... Germany
Second Hand DMG DECKEL FP5 CC / T for Sale cheap | Asset-Trade
DECKEL
DECKEL
FP5 CC/T Milling Machine 1989 Used DMG DECKEL FP5 CC / T - Universal CNC tool milling machine CNC control DECKEL Dialog 11 Travels X / Y / Z 800 x 600 x 550 mm NC rotary table / Ø 600 mm Table load up to 500 kg U sliding head Speed 0 - 6,300... Germany
Used DOOSAN PUMA 600LM - Horizontal CNC Slant bed Lathe | Asset-Trade
DOOSAN
DOOSAN
PUMA 600 LM mint condition 2009 DOOSAN PUMA 600LM - Horizontal CNC Slant bed Lathe Only 1200 Hrs of opperation!! Technical Data: control: Fanuc 2Li TB turning lenght: 3200mm travel - Z: 3235mm turning - diameter: 900mm Schwingdurchmesser max: 1030mm... Austria