Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
Used MAZAK QT Nexus 350-II M CNC Lathe 1 | Asset-Trade
MAZAK
MAZAK
QT NEXUS 350-ii M CNC Turn Center 2008 Used Mazak Quick Turn Nexus 350-II M CNC - Lathe Hours: At 16310, spindle 3639 Control Mazatrol Matrix Nexus Max. Turning diameter 420 mm Turning length 1538 mm Bar capacity 102 mm Spindle motor 30 kW Max. Spindle... Germany
Used CME FS-2 Bed Milling Machine for Sale 1 | Asset-Trade
CME
CME
FS 2 travelling column milling 2005 Used CME FS-2 Bed Type Milling Machine  Milling head in September 2014, with the new bevel gears Control Heidenhain TNC 426 Table clamping 2000 x 850 mm Table load 4 tonnes High speed up to 20 m / min.... Germany
RASTER
RASTER
HR 90 NL - 4 S punch press automats 1978 RASTER HR 90 NL-4S exentric punching machine      Pressure 90 tons      Stroke rate 15-75 cycles / min      Ram size 960 x 820 mm   ... Germany
Used DÖRRIES SD 160 NC - Vertical turret lathe | Asset-Trade
DÖRRIES SCHARMANN
DÖRRIES SCHARMANN
SD 160 NC VTL 196x DÖRRIES SD 160 NC - Vertical turret lathe face plate diameter 1600 mm swing diameter 1800 mm urning height 1400 mm ram stroke max 700 mm faceplate turning speed range 2 150 U / min feed rates from 0.04 to 8 mm /... Germany
UNION
UNION
BFT 125/3 table boring mil with overarm (spindle) 1971 UNION - BFT Type 125 / 3 - table boring mill Top condition with overarm (spindle) Only used for finishing Control: conventional with digital display     With cross slide 800 mm diameter and... Germany
Used ESTRATEGA slitter line 1500 x 3 mm Longitudinal  | Asset-Trade
EXTRATEGA
EXTRATEGA
1500x3 mm Slitting line 2008 Used ESTRATEGA slitter line 1500 x 3 mm Longitudinal Decoiler loading bench introduction unit group centering devices rotary cutters up and down saddles scrapwinder press felt press coiler carousel with two arms... Italy