Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
Used DECKEL - DMU 125 P Universal Machine Centre | Asset-Trade
DECKEL
DECKEL
DMU 125 P Universal Machine Centre 1998 DMG DECKEL DMU 125 P- universal machining center new spindle - built in January 2008 new cooling system installed in January 2008 80,000 operating hours Spindle 24,000 hour single shift Control: Heidenhain TNC 426... Germany
[title] - Asset-Trade http://www.asset-trade.de/
DUNKES
DUNKES
HDZ 315/200/200 deep draw press 1991 DUNKES - HDZ 315/200/200 - Deep-pull presses Was overhault for over 37.000 Euro but never went into production again.     Germany
used MAZAK Laser Path 50 / 100-3D  | Asset-Trade
MAZAK
MAZAK
Laser-Path 50100-3D Laser Cutting Machine 12/1989 used MAZAK Laser Path 50 / 100-3D laser cutting system Laser power 1000 W Control Fanuc Technical specifications: travels X-axis 2540 mm Y-axis 1300 mm Z-axis 1016 mm A-axis +/- 270 ° B-axis +/- 270 ° W-axis... Germany
Asset-Trade http://www.asset-trade.de

HANS SCHOEN
NHN/ZP 1250 2003 Hans Schön Press - NHN / ZP 1250 - Hydraulic Pressure Press Pressing force  12,500 kN Depth of draw 500 mm Stroke 500 mm Distance between uprights 3160 mm Height 1700mm Max Plunger 1400mm Clamping area 1300 x... Germany
Used UNION - BFP 130/5 CNC floor type | Asset-Trade
UNION
UNION
BFP 130/5 CNC floor type 1977 UNION BFP 130/5 - CNC Table Type Horizontal HEIDENHAIN TNC 360 Travels X / Y / Z = 2.500/1.600/1.200 mm Spindle = 130 mm / ISO 50 Spindle speed 900 r / min Field plate & clamping table Germany
Used WAFIOS FTU 5.3-98/B CNC Bending center with RVM
WAFIOS
WAFIOS
FTU 5.3-98/B CNC bending center with RVM 4 / B 11/1993 Used WAFIOS FTU 5.3-98 / B - CNC bending center with freely programmable electronic control. For the production of 2- and 3-dimensional bent parts, all kinds of spirals, rings - also 2- and 3-dimensional - and diverse... Germany