Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
Used CME FS-2 Bed Milling Machine for Sale 1 | Asset-Trade
CME
CME
FS 2 travelling column milling 2005 Used CME FS-2 Bed Type Milling Machine  Milling head in September 2014, with the new bevel gears Control Heidenhain TNC 426 Table clamping 2000 x 850 mm Table load 4 tonnes High speed up to 20 m / min.... Germany
Used TOS - SKQ 16 NC With New Siemens Control | Asset-Trade
TOS
TOS
SKQ 16 NC new Siemens Control 1984 TOS Hulin SKQ 16 rotating carousel center with new Siemens control New Siemens 840 D control in 1999 Swing diameter 1900 mm Turning Diameter 1440 mm Turning length 1200mm Drive power 63 KW Speed ​​from 3.1 to 315 U /... Germany
TRUMPF
TRUMPF
TRUMATIC L 2530 2400 Watt 10/1999 TRUMPF TRUMATIC L2530 LASER with TLF 2400 turbo laser      SIEMENS 840D      mach in 65319 h      laser in 63,219 h      jet... Germany
GLEASON PFAUTER
GLEASON PFAUTER
SH-150 Gear Hobbing and Shaping Mach. -combined 1992 PFAUTER SHOBBER SH150 - CNC Gear Hobbing and Shaping Machine with back-taper device   3 Machines Available 1 Machine left !!!   SIEMENS SINUMERIK 3M Wheel diameter - max. 150 mm Gear width 230 mm... Germany
Used KITAMURA Mycenter 3XiF vertical machining center 4 axis machine | Ass
KITAMURA
KITAMURA
Mycenter 3XiF vertical machining center 4 axes 2007 KITAMURA 3X iF SP vertical machining center with pallets 2 at 180 ° turntable assembly   Scraped precision flat guides; Ideal for steel processing; Spindle and cooling bed Spindle ON  8300 HRS... Germany
Used KERN DS22A high performance centre lathe for sale
KERN
KERN
DS 22 A High Performance lathe 1974 Used KERN DS 22A Centre Lathe workspace Swing diameter 520 mm Turning length 950 mm above the bed 300 mm Distance between centers 1000mm Speed 1.500 U / Min Dimensions (LxWxH) 2300x950x1300 mm ca. Germany