Asset-Trade

Assessment and Sale of Used Assets world wide

KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

Printer-friendly version
Ref. Nr.: 
748-11062159
 
Year: 
2002
 
Location: 
Germany
 
Model: 
KKS 401 NA ABG T4​
 
Available: 
Immediately
 
Weight (kg): 
2.700 kg

Used KALTENBACH KKS 401 NA ABG T4
Fully-Automatic Universal Circular Saw for Materials Up to Ø 150 mm

Fully automated, universal fermentation saw for steel.
All materials and dimensions are freely selectable via a table and touchpanel.

  • Saw blade Ø mm 450 - bore 50 mm,
  • Motor power kW 4,0
  • Total power requirement 10 Kw
  • Cutting speed m / min 7-43 stubless
  • Saw blade feed rate from 0 - 1200 mm / min
  • Rapid return saw blade 3,500 mm / min
  • Material class steel up to St 60 and GG22

Working area:

  • Round material 90 ° 150 mm
  • Square material 90 ° 140 mm
  • Flat material 90 ° 240 x 80 mm
  • Flat material 40 ° 195 x 60 mm
  • U-profiles lying 90 ° 240 x 85 mm
  • U-profiles lying 45 ° 180 x 70 mm
  • U-profiles standing 45 ° 120 x 55 mm

Material supply:

  • Section length can be pre-selected 10 - 9.999 mm / min
  • Max. Stroke length 1000 mm
  • Feed rate 12 m / min
  • Return speed 30 m / min
  • Rod support over roller track

MALLEPREE

  • Head cuts and rest pieces are pushed separately into a rest box.
  • There are 5 positions (up to 1000 mm cutting length) which can be programmed to work on paralels and a length of 1000 - 6000 mm.

Machine weight:

  • Basic machine 2.7 t
  • Sorting unit 1.8 t

BENEFITS AT A GLANCE

  • standard saw blade: Ø 450 mm
  • Mitre cuts +/- 60 Degrees
  • Automatic processing of flat, angle and solid materials, tubes and special profiles
  • Optimum swarf flow through the KALTENBACH “cut from below” principle
  • High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
  • Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
  • Minimal end-piece lengths due to special gripper design
  • Automatic cut-off sorting
  • Simple operation and programming via touch screen

 

Direct Contact for :
Used KALTENBACH - KKS 401 NA ABG T4​ Fully-Automatic Universal Circular Saw

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version
Refresh Type the characters you see in this picture. Type the characters you see in the picture; if you can't read them, submit the form and a new image will be generated. Not case sensitive.  Switch to audio verification.

Similar Machines:

Images Make Model Year Description Location
Used GLEASON Genesis Power Shaving 130 - Gear Shaving Machine | Asset-Trad
GLEASON PFAUTER
GLEASON PFAUTER
Genesis 130 SV Gear Shaving Machine 2007 GLEASON Genesis Power Shaving 130 - Gear Shaving Machine Siemens 840D CNC Control Max Gear Dia : 180mm Max Module : 5 Total Power : 32W Max Gear Face Width : 50mm Year of Make : 2007/2008 The machine went out of... India
SAMPUTENSILI
SAMPUTENSILI
SU SML F.1S.4TA Gear Deburrer 1991 SAMPUTENSILI SU SML F.1S.4TA - Gear Deburring NC control Processing time 2-4 Sec. Cycle time 12-15 sec Conventional control Wheel diameter - max. 20-200 mm Tooth width 4-105 mm Workshop testing Connected load 12,5 KW... Germany
KALTENBACH
KALTENBACH
KKS 400 E Circular Saw 1989 KALTENBACH - KKS 400 E - Cold Saw Saw blade diameter: 400 mm capacity 90 ° round: 130 mm Cutting capacity at 90 ° rectangular: 120 mm Cutting capacity in mitered at 45 ° round: 130 mm Cutting capacity in... Germany
Used DMG DECKEL DMC 63 V CNC milling machine for Sale
DECKEL
DECKEL
DMC 63V new Spindel 2000 Used DMG DMC 63 V CNC milling machine The spindle was remanufactured recently – it has new bearings, springs, seal and piston. Controller Heideneien 426M Travels  X Axis – 630 mm Y Axis Travel... Germany
used MIKRON WF 31D CNC-Mill Centre for Sale | Asset-Trade
MIKRON
MIKRON
WD 31 D universale tool Milling centre 1994 Used MIKRON WF 31 D - Universal CNC Milling Machine suitable for tooling, fixture construction, education, and mold making. Technical specifications: CNC Heidenhain TNC 355 Table dimention 900 x 530mm Traverse (X, Y, Z... Germany
Used REISHAUER RZ 701 CNC Gear Grinding Machine | Asset-Trade
REISHAUER
REISHAUER
RZ 701 CNC Gear Grinding Machine 1988 REISHAUER RZ 701 CNC Gear Grinding Machine- Vertical max. wheel diameter 700 mm gear width 250 mm max. module 7 min. module 0,5 root circle diameter 34 mm slide stroke 300 mm clamping length 255-570 mm workpiece... Poland