MORI SEIKI - NZ2000T3Y3 CNC multi-axis rotary milling center

Ref. Nr.:

810-03917

Year:

2008

Location:

Germany

Condition:

Like new

Model:

NZ2000T3Y3

Available:

Sold

Weight (kg):

9.400 kg

USED MORI SEIKI NZ2000T3Y3 CNC multi-axis rotary milling center with IEMCA Bar loader Master 880 Verso MP

Operational hours: ON 11.413 / Spindel 14.95 hrs
CNC Control FANUC MSX-701 III

Max. machining diameter 320 mm
Max. machining length 810 mm
Bar machining capacity diameter 65 mm
Spindle bore: 73 mm
Travels
- Races axes X1 / Y1 / Z1: 210 x + 65 / -45 x 300 mm
- Races axes X2 / Y2 / Z2: 210 x + 45 / -65 x 810 mm
- Races axes X3 / Y3 / Z3: 210 x + 65 / -45 x 300 mm
- B axis travel: 870 mm
Spindles
- spindle speed: 5000 rev / min
- sub spindle speed: 5000 rev / min
- milling spindle speed: 6000 rev / min
- Spindle nose: A2-6
C axis on the 2-pin: 0,001 °
Number of turrets: 3
Number of tools: 16 x 3 turning tools
Rapid X / Y / Z: 30 x 20 x 50 m / min
Motor spindle: 25/22 kw
milling spindle motor 7.5 / 5.5 kilowatts
Total Power Requirements: 92.7 Kva
Dimentions
- Length 4000 mm
- Width 2800 mm
- Height 2400 mm

Purchase information for :
Used MORI SEIKI - NZ2000T3Y3 CNC multi-axis rotary milling center

VAT: 19%

Sold as: Ex Works

Documents for Used Machinery:

MORI SEIKI - NZ2000T3Y3 CNC-Multi-Achsen-Dreh-Fräszentrum-Asset-Trade-MORI SEIKI - NZ2000T3Y3 CNC multi-axis rotary milling center-Asset-Trade-stangenlader.pdf

Images of Used Machinery:

Direct Contact for :
Used MORI SEIKI - NZ2000T3Y3 CNC multi-axis rotary milling center

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33

Asset Contact Form

Similar Machines:

Make	Model	Year	Description	Location
OKUMA	LC 20-2ST 4 Axis Lathe	1986	Used OKUMA LC 20 2-ST CNC lathe 4 Axis Control OKUMA OSP-5000L CNC CONTROL WITH 9" CRT Specification Swing over the Bed 15.75" Swing over the Cross Slide 13.78" Chuck 10" Chucking part...	Germany
MURATEC	Murata MW 12 G Twin Spindle Turning Center	1997	Used Muratec Murata MW12-G CNC Twin Spindle Turning Center, with an Overhead Gantry Loader Fanuc 16T CNC Control Technical Specifications: Distance Between Centers 13.39" Max. Swing 11.61" Standard Chuck...	Italy
TRAUB	TNS30/42 with bar loader	1989	Used TRAUB TNS 30/42 - CNC turning and milling center CNC Control TX-8-D Hours: 53881 3 turrets with 12 tools red. drive subspindle conveyor chip conveyor Machine has a DN42-3000 Max Cutting Length: 220 mm Maximum...	Germany
INDEX	G 200 C200/4 almost new	1996	Used INDEX Ratio Line G200 C200 / 4 - Compact turn-mill center for complete machining Only 855 ON hours and only 471 hours of operation. This machine has never been used for turning, as this was only used for...	Germany
OKUMA	LB 15-II CNC Lathe under Power	1995	Used OKUMA LC 15 II - CNC Slant Bed Lathe Operating House 35.000 hrs / Spindel 15.000 hrs Technical Data Okuma OSP 5020 L Control Diameter x Length D250 x 230mm toolchanger positions 12 spindle bore 40 mm...	Germany
OKUMA	LB 10 CNC Lathe	1985	OKUMA LB10 - CNC Lathe Control OSP 5000 L - G 2-station turret with VDI 30 Recording 3-jaw chuck with carbide jaws with chip conveyor (belt) Max. Turning diameter 150 mm Max. Turning length 250 mm	Germany, NRW