Asset-Trade

Assessment and Sale of Used Assets world wide

STARRAG HECKERT - CWK 400 D Twin Pallet HMC

Printer-friendly version
Ref. Nr.: 
824-06141046
 
Year: 
3/2002
 
Location: 
Germany
 
Condition: 
Model: 
CWK 400 D
 
Available: 
Immediately
 
Weight (kg): 
12.800 kg

Used STARRAG HECKERT CWK 400 D horizontal machining center with two pallets

  • CNC Control Siemens 840D
  • Hours of operation AN 39022
  • Spindle hour only 2500 was completely replaced in 2013 !!!

Technical specifications:

  • Pallet size 2x (400x400mm)
  • Tool holder HSK63

Travel:

  • Stand longitudinal movement X-axis 650 mm
  • Support vertical movement Y axis 650 mm
  • Table transversal movement Z-axis 650 mm
  • B axis 360 degrees x 0.001 indexing
  • Rapid traverse 40 m / min

Spindle

  • Drilling / milling spindle speed from 50 to max. 15,000 rpm - steel
  • Drive cable: 31KW
  • 165 Nm at 100% ED
  • 200 Nm at 40% ED

Other

  • Tool breakage detection
  • Remote maintenance by modem
  • Installation mass (LxWxH) 4,600 x 3,920 x 2,900 mm

The machine is sold including chip conveyors, cooling equipment (company Knoll) and cooling unit (company Hyfra).

Not included are clamping devices and tools.

The machine is in good condition and is currently still used in our production.

Purchase information for :
Used STARRAG HECKERT - CWK 400 D Twin Pallet HMC

VAT: 19%
Sold as: Ex Works
 
 

Images of Used Machinery:

Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
Used STARRAG HECKERT CWK 400 D for Sale | Asset-Trade
 

Direct Contact for :
Used STARRAG HECKERT - CWK 400 D Twin Pallet HMC

For further information, visits, inspections or purchase request please contact us:

Telephone: +49 2151 32 500 33
 

Asset Contact Form

Printer-friendly version

Similar Machines:

Images Make Model Year Description Location
Used KAPP - KX 1 gear centre Machine | Asset-Trade
KAPP
KAPP
KX 1 gear centre 2004 USED KAPP KX1 - economic Gear Center Siemens Sinumerik 840D Specifications Tip diameter max. 250 mm Module range max. 10 mm Gear width max. 350 mm Helix angle max. ± 35 degrees Accessories: Coolant... Germany
Used BIHLER - RM 30 Punching and strip bending machine | Asset-Trade
BIHLER
BIHLER
RM 30 Punching and strip bending machine 1987 BIHLER RM 30 - wire/strip multislide forming machine E4 welding devices control cabinet 5 ton punching press 2 slides Coiler Straightenning device Material dimensions depending on the strength: Max width 40 mm... Bulgaria
Use Hurco VMX 50 Vertical CNC milling center | Asset-Trade
HURCO
HURCO
VMX 50 VMC 4/2001 Use Hurco VMX 50 Vertical CNC milling center Spindle in X / Y axis were renewed, spindle was renewed approx. 2011 Operating hours 30.126 hours Control unit Ultimax 4 Without zero point clamping system (photo)... Germany
Asset-Trade http://www.asset-trade.de/de
AMADA
AMADA
FaB 80D 1986 AMADA Fine Alpha Bender 80D - (FαB 80D) - press brake Power: bending with 800 KN compression force Bending length: 2505mm between columns: 2000 mm Control: NC9-EX Dimensions (LWH) 2930 x 1465 x 2270mm Last... Germany
Used OSKAR FRECH DAW 20 S - die casting machine  | Asset-Trade
FRECH
FRECH
DAW 20 die casting machine 1997 Used OSKAR FRECH DAW 20 S - die casting machine With DATA VARIO-screen control Proportional hydraulics on the Press page Electric single chamber Pneumatic sprayer Technical Specifications Clamping Force 240 kN... Germany
Used OKUMA MX-55 VA VMC 3-Axis Build 2003 for Sale
OKUMA
OKUMA
MX-55 VA VMC 2003 Used OKUMA MX 55 VA Vertical Machine Centre Operational Hrs. ON 32.341, Spindel On 12.370 Technical Data: Spindle Speed 12.000 RPM kW 22 Control OSP-U100M Number of Axes : 3 Travels X-Axis 1050mm (... Germany